R1 Wurks Super LCG Speed Controller



*Note: This ESC will NOT work with R1 Servo's (ironically), but works perfectly with all other brands*

The ultimate ESC for Blinky - 21.5T and 13.5T

New from R1 Motor lab is the new Super LCG 80A top of the line spec racing brushless speed controller. Developed using the most advanced CPU technology and proprietary software combo, to deliver the smoothest most responsive throttle feel yet. Months of data analysis was done both on the race track & on the dyno to fine tune the Super LCG power delivery & brake strength. The controller offers the same advanced throttle and brake adjustability as our Digital 2 ESC to suit a wide range of driving styles. The system offers blinky mode (zero timing) for spec racing. All adjustable settings are easily programmed using our digital program box, designed with an intuitive, easy to use interface. The unit also features A.C.L.C. Advanced Component Level Cooling system, this design allows individual Mosfets (inner & outer components) to transfer heat directly to the upper heatsink. The Super LCG saves up to 50 grams (including wire) of weight compared to our full sized ESC, and has a nearly 30% smaller footprint. It also includes Pre-Soldered Black 14awg wire, with cooling fan.


- Low Centre of Gravity
- Ultra Light Weight
- Advanced High Speed Micro Controller

- Enhanced Throttle and Brake Smoothness with Programmable Frequency
- Blinky Mode for Spec Racing
- Programmable via Digital Program Box (Sold separately)
- Premium Low ESR Capacitor
- All Aluminium Enclosing Construction A.C.L.C. (Advanced Component Level Cooling) 
- Motor and ESC Temperature Protection
- Future Firmware Updates will be available via Microsoft User Interface
-Designed to ROAR/EFRA Specifications


- Operation Mode
- Reverse Speed
- Low Volt Cut off (Battery Protection)
- Drag Brake
- Initial Brake
- Full Brake
- Brake Frequency
- Power Level
- Drive Frequency
- Neutral Dead Band
- Temp Cut Set
- Boost Timing
- Boost RPM
- Boost ACC (Boost Timing Acceleration)
- Turbo Timing
- Turbo Slope
- Turbo Delay
- Rotation Mode
- Restore Default



Scale: Radio controlled 1/10th scale vehicle
Continuous current: 80A 
Current Burst: 380A
Power input: 5-7 cells Nimh/NiCd or 2s Lipo, 2s Life 
BEC output: 6V/7.4V @ 3A
Wire: 14awg
Cooling fan: 25x25x7mm Premuim High Speed Fan 
Motor: 540 size 2 pole Brushless sensored
Motor maximum turn limit: 13.5T 
Dimension: 31.5mm (L) x 25.6mm (W)  24.6mm(H)
Weight: 25g without fan, capacitor and stock wiring

ROAR APPROVAL pending and due to be confirmed very soon.