Introducing our carbon tank guard for the Tekno NB48 2.0 Buggy!
Our carbon tank guard shields the tank from heat generated by the exhaust, which can heat up fuel and cause damage to your fuel tank. The carbon guard protects the tank melting in crashes which may cause the pipe to get knocked inwards next to the tank.
For installation, simply drill two holes in the upper catchment section of the tank, install your preferred M3x8 Screws and M3 Locknuts, and tighten. The guard can be used with the fuel line clips also to keep everything neat and tidy!
The tank guard is 1mm thick and CNC Machined in Australia from High Quality Carbon Fibre. It features a nice CNC engraved RC MAKER Logo.
Includes: 1x Carbon Fibre Tank Guard
Required for installation
2x M3x8mm Button Head Screws of your choice
2x M3 Locknuts of your choice
1x 3mm Drill, or Body reamer for drilling the holes in the tank.
Instructions for installation:
Align the tank guard on the side of your fuel tank so that the top of the guard is flush with the top of the tank.
Using a sharpie, mark the location of the M3 holes on the tank
Using a 3mm Drill bit or body reamer, make two holes in the tank in the locations marked. Ensure you make them as close to 3mm as you can!
Install the screw from the outside, facing inwards. First through the carbon, and then into the tank.
Install a locknut on the other side of the tank, hold with pliers and tighten with with 2mm driver.