RUDDOG Racing 6600 (99.9Wh) 150C/75C 15.2V LCG 1/8 Pack LiPo-HV Battery

RUDDOG Distribution presents the latest addition to the Ruddog Racing range, a battery specially designed for 1/8th scale RC car racing. The 4S battery uses  the latest generation of silicon graphene cells for maximum pressure and long endurance.

With a current output of up to 150 C (peak) or 75 C (continuous), the EFRA-homologated battery with a nominal voltage of 15.2 V is the optimal power source for performance-hungry 1:8 racing vehicles.

Equipment details:

- HV silicon graphene cells developed on the basis of the proven 2021 cell generation for low internal resistance and high capacity
- 75C continuous current / 150C peak current
- Perfect choice for 1:8 scale racing cars
- EFRA homologated

 

Technical specifications:

- EFRA & RCRA Australia Approved

- Capacity: 6575mAh / 99.9Wh

- Rated Voltage: 15.2V/4S

- Discharge rate: 75C/150C

- Cell type: Silicon-Graphene Lithium-Polymer

- Length: 138.9mm

- Width: 47.0mm

- Height: 38.5mm

- Weight: 475g

- Plug: 5mm socket

- Balancer connector: XH

Charging and storage information: We recommend never storing the battery fully discharged or fully charged. In general, a voltage of about the nominal voltage of the battery is recommended for storage. In addition, the batteries should be used at regular intervals, or at least go through a discharge-charge cycle. The batteries should not be exposed to direct sunlight during storage and charging to avoid additional heat. This also means that the trunk of your car is not the right place to store your batteries in summer. Furthermore, we recommend a maximum charging current of 1C for a long service life of your batteries. A higher charging power reduces the battery life considerably. During the charging process, we recommend using a LiPo bag: