MXLR - MAX-09-026 - Rear Body Support - Body Support Awesomatix A800R / RR

Behind MXLR is Max Mächler – an internationally successful RC racer.
High-quality and exclusive products – engineered in Germany.
Each product has been carefully selected and developed.
No blunt rebranding – just quality that Max himself uses in his everyday racing on the racetracks of the world!

The flexion of lightweight bodyshells, especially at higher speeds, leads to a noticeable reduction in performance!
The solution is the MXLR Rear Body Support for the Awesomatix A800R/RR:
- Prevents body flexion at higher speeds
- Reduces the risk of cracks in the wheel arches. 
The result is a longer bodyshell lifespan and improved performance on the racetrack, as the body retains its original shape and generates more downforce!

The MXLR Rear Body Support is made of high-quality, highly durable material with excellent impact resistance! During development, special attention was paid to the A800R bulkhead design and the importance of flexibility in this area. The Rear Body Support is engineered to minimize flexibility!
The Rear Body Support can be mounted in three different locations on the vehicle, depending on the toplink and toplink mounting options!
1: On the rear top deck (possible in either direction)
2: In front of the AM19 toplink brackets (facing rearward)
3: Behind the AM19 toplink brackets (facing forward)
With the standard AM19-R toplink brackets, you can choose the desired position – all three fit.
With the optional AM19-TLT toplink brackets, you can use the rear position and orient the bracket forward.

For long toplinks mounted on the axle supports, the front brackets of the AM19 can be used.

Pictures of all three mounting options can be found in the gallery.

INFO: Mounting screws are not included! We recommend using Awesomatix aluminum screws (SB3X7AL) in 7 mm length.

Installation instructions:
- Select the appropriate mounting location for your Toplink setup.
- Install the rear body mount.
- Adjust the rear body mount to the correct height! The top screw (not included) should touch the trunk lid without any additional play when the body rests on the rear body post.

MAX-09-026 contains:
1x rear body mount for Awesomatix A800R/RR

Note:
Please keep in mind that this product is a 3D printed product. Layers and lines of the material are visible.
MXLR strives for the highest possible quality and therefore uses 3D printers capable of delivering this quality. However, a 3D printed part will always differ in surface finish from a milled or injection-molded part.

Note:
MXLR images may show additional parts or vehicles that are not included in the scope of delivery and are intended only to illustrate the application with practical examples. These parts are not included in the scope of delivery of this article.
Before using MXLR products, it is very important to read the general safety instructions. These, along with the product manuals, can be found on this page: INSTRUCTIONS